[Openpvrsgx-devgroup] [PATCH 1/2] drm: pvrsgx: pvr-drv: Fix OCP handling with ioremap and reg access
ivo.g.dimitrov.75 at gmail.com
Sun Oct 31 07:38:06 CET 2021
On 23.10.21 г. 14:09 ч., H. Nikolaus Schaller wrote:
> Hi Tony,
>> Am 23.10.2021 um 12:12 schrieb Tony Lindgren <tony at atomide.com>:
>> The OCP registers need to be configured for SGX on some omap variants
>> to route the SGX interrupt. However, this must not be done on omap34xx
>> as the OCP registers are not readable and reads will hang the system.
>> We currently have pvr-drv hang on omap3430 devices like n900 because of
>> trying read the OCP registers.
>> We need to a combination of suitable ifdefs for each SoC for the OCP
>> regs, but that's not a nice solution. Let's just start getting rid of
>> the OCP related ifdefs and configure the OCP directly in the pvr-drv as
>> needed. We just need to reconfigure the OCP registers in the runtime PM
>> functions for now.
>> Note that this still leaves SysClearInterrupts() doing a write to ack the
>> OCP interrupt. However looks like the write won't do anything on omap34xx
>> so we can leave it for now and remove it later when adding support for
>> interrupt handling to pvr-drv.
>> Also sgx_jz4780 also configures OCP regs, but I suspect that code never
>> was enabled and was copied from earlier TI specific code. If sgx_jz4780
>> really uses the OCP regs, it needs at least the ocp_base configured.
>> Let's also add pvr_sgx_readl() and pvr_sgx_writel() while at it to make
>> it easy to rewrite further features and make it clear that the OCP
>> register area is SoC specific and separate from the SGX registers.
>> Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75 at gmail.com>
>> Signed-off-by: Tony Lindgren <tony at atomide.com>
> looks good to me. Unfortunately I can't test the 1.17 setup any more.
> It looks as if the 1.17 user space code needs a libc version which
> only became available in Debian Bullseye but some other requirement
> needs something older that is no longer available in 11.1. So my SD
> card for the Pyra got broken after an apt-get upgrade. And I would have
> to look for backports or compiling older versions from source.
Look at my other mail, you are now able to compile mesa with *proper*
1.17 pvr dri driver, so glibc 2.29 is no longer a requirement.
More information about the openpvrsgx-devgroup